The main movie is the largest M2TS file and you can check it in preview window.

Before launching Pavtube Blu-Ray Ripper for Mac, hook the BD drive with your Mac and put Blu-ray disc in.

Besides, the program also allows users to snapshoot the desired pictures and clip the video segment when previewing.

The conversion progress is faster than most other software.

Just click the ¡°Convert¡± buttonto begin the Blu-Ray to Xvid conversion.

To set other advanced video and audio parameter, just click on ¡°Settings¡±.

This guide is to tell you how to convert Blu-Ray to Xvid with Pavtube Blu-Ray Ripper.

If you are seeking for an easy-to-use Blu-Ray to Xvid Converter, here is the right place.

Step 1: Load Blu-ray disc.

Xvid is a video container format that takes much less space than Blu-Ray DVD, yet perform fairly well in audio and video quality.

Xvid is a video container format that takes much less space than Blu-Ray DVD, yet perform fairly well in audio and video quality.http://www.fugly.com/

If you are interested in this program, please click here to download free trail of Pavtube Blu-Ray Ripper for Mac.

Click on ¡°Format¡± bar to choose the output format.

Select HD Viedo-> Xvid AVI.

Step 2: Set Output format.

When the M2TS files are imported to file list, check the main movie and leave other files unchecked.

If you would like to save storage and can stand with some quality loss, you may choose Common video ->Xvid AVI.

You do not have to open the any of the folders.

The main movie is the largest M2TS file and you can check it in preview window.

Download and install Pavtube Blu-Ray Ripper for Mac and with this program you can convert Blu-Ray disc to Xvid in an easy and fast way.

Here you choose a favorable format from versatile video and audio formats.

Click on ¡°Channels¡± and check ¡°6¡±, and confirm your settings by clicking ¡°OK¡±.

Here you choose a favorable format from versatile video and audio formats.

Ripping Blu-ray movie and get 5.1 sound.

Connect the external BD drive with Mac and put Blu-ray disc in.

It supports both DTS-HD and Dolby TrueHD and is capable of converting the audio to Dolby 5.1 surround sound.

The DTS-HD mark is frequently presented on Blu-ray Discs, as it is an optional audio codec accepted by Blu-ray Alliance.F4V downloader is specifically developed for Internet users to download, convert and arrange F4V files.

Few Blu-ray Rippers on market can recognize DTS-HD MA, Pavtube Blu-ray Ripper is one of them.

It takes a few seconds till all the M2TS files are loaded to file list.

Blu-ray Ripper for Mac

With 7.1 channels of sound, DTS-HD MA creates a listening experience that brings the spectators right into the action, and that¡¯s why it is favored by audiophiles.

An external BD drive is required as a plus.

There is no doubt that Blu-ray ripping be time-consuming.

Personally I would like to advise you set auto shutdown in progress window (it pops up once you click Convert) and leave it there.

Right below the file list lays the ¡°Audio¡± option, where you could adjust the dubbing to your native language.

Tracks are identified by numbers so you have to listen by yourself to make sure which is the right one you want.

The following guide focus on how to set Dolby 5.1 channels when ripping Blu-ray disc with DTS-HD Master Audio.

Next click ¡°Settings¡± and customize advanced audio and video parameters.

The app is compatible with both Leopard and Snow Leopard.

Adjusting audio and video settings.

Here you choose a favorable format from versatile video and audio formats.

In this case the preview window makes senses.http://www.flurl.com/

This is the last step, and all it required is one click on ¡°Convert¡± button and great patience.

Run Blu-ray Ripper for Mac and the interface below will pop up.

The trial version provides full access to the functions so that you could test the conversion quality.

Check the main movie and leave unwanted M2TS files unchecked.

The main movie is distinguished by its duration---the longest one.

You could download the clean trial version of Pavtube Blu-ray Ripper for Mac from here.

Since we¡¯re talking about 5.1 sound, it will be a nice idea to choose H.264 encoded videos, like H.264 MP4, H.264 MKV and H.264 MOV.

With 7.1 channels of sound, DTS-HD MA creates a listening experience that brings the spectators right into the action, and that¡¯s why it is favored by audiophiles.

Do you want to convert Blu-Ray DVD to iPod for enjoyment anytime anywhere? Use Pavtube Blu-ray Ripper to convert Blu-Ray disc to Apple TV for playing, and the plug in your Apple TV can simply start the enjoyment. This Blu Ray Ripper can help you perfectly, which not only can convert Blue Ray DVD to Apple TV with a fast speed and luxury output, but also provides you with different video formats for different models.

1. We strongly recommend Pavtube Blu-Ray Ripper for the following advantages:

Convert Blu-ray M2TS movies to Apple TV format and other common videos.

Fluently edit video by trimming, cropping, merging, adding logo, replacing audio, adjusting video effects and volume and so on.

Directly rip DVDs and Blu-ray discs to Apple TV with super high speed and excellent HD quality.

Directly and smoothly rip protected DVDs and Blu-ray discs to Apple TV without out of sync.

Download it for FREE NOW: Pavtube Blu-Ray Ripper.

2. Step by step: How to convert Blu-ray disc to Apple TV
You will be guided to easily and quickly convert your Blu-ray disc to Apple TV with Pavtube Blu-Ray Ripper.

Step 1: Download the free trial version of Pavtube Blu-Ray Ripper, install and launch the program. Make sure you have had an external Blu-ray drive connected with your PC. Insert the desired Blu-ray disc and run Pavtube Blu-ray Ripper. (A free trail version of Blu-ray Ripper can be downloaded from here.) Now when you see the interface, click on ¡°DVD ROM¡± and the app will import Blu-ray movie from the BD-ROM. Check the directory and click ¡°OK¡±.

MKV Converter can convert MKV files to AVI, MKV video to MP4, MKV to 3GP/3G2 and can convert MKV files to video for your iPod, iPhone, PSP etc.
Step 2: Set subtitles and audio tracks. One Blu-ray disc usually comes with multiple audio tracks and subtitles of different languages. Right under the file list you could find Subtitle and Audio option from where the subtitle and dubbings are set. The dropdown list shows you the detailed information, such as the subtitle language, audio language, codec, channels etc. Here you check the main movie (with longest duration), set the subtitle and audio track, and double-click the file to preview your settings.   

Step 3: Set output format and destination.Click on ¡°Settings¡± and there are various output formats for you to choose from. Move you pointer to Apple TV and select a proper format from the sub-list. Both MPEG-4 and H.264 encoded MP4 are available. Optional audio codec are AAC and AC3. To further customize output audio and video parameter, like bitrate and aspect ratio, you may click ¡°Settings¡± button. When you completes setting, do not forget to confirm it by clicking OK.www.vidilife.com

Step 4: Hit "Convert" to run! Just few minutes, the conversion from blu-ray to Apple TV will be completed. Click "Open" button to find the output movie. And now you can transfer the movie to Apple TV for enjpy on your wide screen TV.

Some Canon digital still cameras (Powershot A75, A63, S410 etc), are capable of shooting a limited amount of video, since there is no tape, it is saved as an MVI file format. However, the MVI file format is not compatible with other programs. Even windows media player refuse to play MVI file. Besides, editing software like Pinnacle Studio and Windows movie maker do not work with the format. Because of this, the files need to be converted to a format that is more widely used, such as AVI so that these videos shot with still camera can be played and edited as easily as other common videos. This guide is to tell how to do that.
Software you'll Need: Pavtube Video Converter

Step 1. Download Pavtube Video Converter, and follow the prompts to install the program. Click "Finish" when the installation is complete, and Pavtube Video Converter will launch automatically.

Step 2. Click ¡°Add¡± to load MVI files or directly drag the files into file list. By default, the files are selected. If you would like to join all the selected files together, check the box of Merge into one. You could view the files in preview window, simply highlight the file and click play button. http://emol.org/movies/



Step 3. Click ¡°Format¡± bar to determine output format. Follow Common Video-> AVI Video (*.avi)/ DivX AVI(*.avi). Click ¡°Settings¡± if you¡¯d like to customize advanced audio and video parameters like Video Codec, aspect ratio, bit rate, frame rate, Audio codec, sampling rate, bit rate, channels. Do not forget to click ¡°OK¡± to confirm your settings. Then type in a desired output location in the "Output" box.

Step 4. Click "Convert¡± to start converting MVI files to AVI. You could set auto shutdown in progress window or leave it there and come back later. After conversion you could edit the converted video in Pinnacle Studio, and make a film out of it or burn it onto DVD.

Learn more: http://www.pavtube.com/guide/convert-mvi-to-avi-for-edit-in-pinnacle-studio.html

Motorola Droid is a top pick among Verizon's smart phones. It's well made and the huge display makes you feel like you've got a mini computer. Android could use some help in the friendly multimedia department with desktop media syncing and more supported video playback formats, but with a little effort the Droid is a very good music player and portable video player. With an additional memory card, you can DVD and even enjoy Blu-ray movies, provided that the movies are converted into MPEG4 or H.264 format first. Here I¡¯d like to share with you a good way that ends up with optimal video conversion for your Droid. Please find a step-by-step tutorial below.
The software you will need: Pavtube Blu-ray Ripper.

Step 1. Run Blu-ray ripper and import source video files.
Pavtube Blu-ray Ripper is recommended as a best tool to help you complete the transcoding. You may download and install Pavtube Blu-ray Ripper and try it out. Launch the app and here pops up an intuitive interface. Click ¡°DVD ROM¡±, and it takes a few seconds to load your Blu-Ray movie from target drive. When all the M2TS files are loaded to file list, check the main movie and leave the unwanted files unchecked. The main movie is distinguished by its length (duration). So check the largest M2TS file. You could view it in preview window.


http://mydigitalshare.com/movies.htm

Step 2. Set output format and A/V settings to fit for Droid.
Specify location for generated files in ¡°Output¡± box and click on ¡°Format¡± bar and follow Common Video->H.264 Video (*.mp4). Here comes to specific settings for Motorola Droid. Click on "Settings" button and you¡¯ll find the settings panel pops up as below:



Optimal Video and audio settings:
Video codec: H.264 MP4
Size (resolution): 848*480pix
Bit rate: 2500kbps
Frame rate: 24fps
Audio codec: AAC
Sample rate: 48khz
Bit rate: 64kbps/ 96kbps/ 128kbps
Channels: Stereo

The native resolution of the Droid screen is 848¡Á480 so it will get you a video to display at full screen. Using these settings could give you a file that plays great on Droid. If you prefer a smaller file size, just set the video bit rate down to 1500kbps and it will still looks fine on screen. Dolby 5.1 Pro Logic sound is available too.

Step 3. Start ripping Blu-ray and DVD movie to play on Driod
Now click "Convert" button and wait. The ViewLog will present you all the info such as conversion progress, conversion state, elapsed and estimated conversion time, and generated and estimated conversion file size. You may check "Shut down computer after conversion" and leave it be. After conversion you could sync the MP4 files to memory card and play them freely on Motorola Droid.

Learn more: http://www.pavtube.com/guide/rip-blu-ray-dvd-to-motorola-droid-with-optimal-settings.html

Apple¡¯s iPad features a 9.7-inch high-resolution 1024¡Á768 multi-touch display, which not only makes it convenient and comfortable for users to read newspapers, magazines, and books, view photos, experience the web, see and touch emails, but also makes it perfect for watching any kind of video, from HD movies and TV shows to podcasts, music videos and more. Since iPad is without distracting keypad or buttons, you will totally concentrate on this big screen, and feel completely immersed in whatever you¡¯re watching.

As of March 12, 2010, Apple fans in the U.S. are able to pre-order the iPad. The iPad is scheduled to go on sale in the U.S. on April 3. Are you ready for watching video and Blu-ray or DVD movie collections on your iPad? If not, this tutorial will give you a solution to the problem of how to play iPad incompatible video files in a detailed way with Pavtube Blu-ray Video Converter Ultimate.

Before that, go to see the iPad supported video formats as below:
TV and video playback:
H.264 video up to 720p, 30 frames per second, Main Profile level 3.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;

MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;

Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

Well, if your movies are out of the above categories, then please follow the following guide to do format conversion before your playback. http://www.jonhs.net/freemovies/

Step 1: Add videos, Blu-ray or DVD movies into this program
Click ¡°Add Video¡± to import video files, and click ¡°Load DVD¡± to import Blu-ray or standard DVDs.

Step 2: Select ¡°iPad¡± as output format
Click the pull down menu at the end of ¡°Format¡± to select an output format for iPad. Here I choose ¡°iPad Video MPEG-4 (*.mp4)¡± as an example.

Step 3: Click ¡°Settings¡± button to adjust audio and video parameters
You are allowed to adjust codec, aspect ratio, bit rate, frame rate, sample rate and audio channel in the popup window to optimize the output file quality. Do remember following Apple¡¯s recommended settings I¡¯ve mentioned in the above contents:http://www.ovguide.com/

Video:
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second
Audio:
Simple Profile with AAC-LC audio up to 160 Kbps, 48kHz, stereo

Step 4: Click ¡°Convert¡± button to start conversion.
Once finished, you can get the output files for your iPad via clicking on ¡°Open¡± button effortlessly.

In principle, all the video converters in the market have their own built-in codec, while sometimes users do not want to use these native codec, but rather use a codec purchased from third party or developed by themselves. For users have this kind of needs, my article will take VFW codec for instance, and aims to introduce you how to transfer your video files with VFW codec via Pavtube Video Converter.(Meanwhile, DivX codec will be mentioned in a certain part of this article, if it is what you are looking for, just do not miss it.)

First of all, we¡¯d better have a brief understanding of VFW. VFW is short for Video for Windows, which is an early Windows video codec format first introduced in November 1992, and has been in use ever since. It is installed on Windows system, and usually used in AVI format, and can be seen by all application programs, so that it allows software developers working on the Windows platform to add the ability to play or manipulate videos to their own applications.

Well, now, let¡¯s move on with the process of converting video files with VFW codec through Pavtube Video Converter.

Once you have launched this program, add your video files to it, and then select ¡°Common video¡± in the drop-down list of ¡°Format¡±, after that opt for an AVI format, please pay attention, only AVI format here allows you using VFW codec to encode your files.

Afterwards, click ¡°Settings¡±, the following interface will pop up. Check a VFW codec for your files, here I choose IR45 for example.

As soon as you have chosen a VFW codec, you will find that some parameters like aspect ratio, frame rate can be adjusted in the following window, while bit rate is disabled, at this time you can click ¡°Config¡± to set your encoder settings.

After clicking ¡°Config¡±, you will see the interface below, and set the parameters on it according to your own requirements. If you are insightful enough, you may have found this VFW codec does not support changing bit rate, so let it go, and just do what you are permitted.

Okay, that¡¯s all about setting video parameters; next, I¡¯ll talk about how to amend video images if they are reversed during the course of encoding. This issue often occurs when the output image pixels of Pavtube Video Converter are inconsistent with the ones that the encoder requires. Take it easy, we can use image reversal function to fix it: flip the videos from left to right or up to down, until they are coincident.

By the way, for more and more people wanna use DivX codec to encode HD videos, here I¡¯d like mention something about it. Actually, the steps of using DivX codec to encode videos via Pavtube are as simple as that of VFW. In the first place, you should have a DivX codec installed on your PC, if not, please download from this link: http://www.divx.com/en/downloads/divx/win. In addition, one more point must be emphasized that the same with VFW codec, to enable DivX codec available, you have to set the output format as AVI, otherwise, you can not find out the DivX codec. In the identical access as VFW, by pressing button ¡°Settings¡±, you are able to go into ¡°Profile¡± panel, and get hold of DivX codec.

Also, when it comes to video parameter setting, bit rate can not be adjust in the following window, so you have to go to ¡°Config¡± to reset them.

Enter ¡°Config¡±, this interface will appear, you can change rate control mode and bite rate here, or press tags like ¡°Codec¡±, ¡°Video¡± to set other parameters inside them.

Best DVD to iPhone Converter is a multifunctional tool, which does not only convert DVD to iPhone formats but also edit the output.

All right, you see, as long as you have made a correct choice of an appropriate video converter, change video codec from one to another while video transferring is like taking candy from a baby. Hooray! My post is ending up now, seems lots of words and pictures; hope they do no dazzle your eyes and can be absolutely helpful, do not waste my mental efforts as well.

Are you still feeling troublesome to search for a useful  freeware to download your beloved YouTube videos?  Since more and more YouTube downloaders  are appearing in the market without intervals, various sorts of software really  make our eyes dazzled. Which one is free? Which one is ease-to-use? Which one  is powerful? Which one is the best of all? All these questions have become big  headaches when you are lingering among them to make a decision. In purpose of pulling  you out of this dilemma, I¡¯d like to recommend you a practical free YouTube downloader, which I¡¯ve been in use for some time, and works well all along. Take it easy to see  whether it is useful or not.

The freeware I¡¯m using is Pavtube YouTube Converter. Notice that, it is a shareware factually (for it has powerful conversion  function), but if you just use its download function, it is totally free, and  will not generate any limitation to disturb you.

Step 1: Free download Pavtube YouTube Converter,  afterwards install and run it.

Its main interface as below will pop up as soon as you  launch it. You can click ¡°Add URL¡± to input YouTube  URL, afterwards, you will enter the window showing in Step 2.

Step 2: Import URL, specify  file name and save path

Copy and paste the URL of the YouTube  videos which you want to download into the textbox after ¡°URL¡±, do remember  tick ¡°Only Download FLV source file¡± only, and uncheck the option ¡°Keep FLV  source file¡±. This program also allows you to rename the YouTube  FLV file. Just type whatever name you like into the textbox after ¡°Save as¡±,  and meanwhile, if you do not want to use the default save path storing the  downloaded YouTube files, you can click on the  ellipse icon at the opposite side of ¡°Save to¡± to specify a destination folder.  After that click ¡°OK¡± button and the download work will proceed automatically.Video to 3GP Converter is a powerful 3GP converter which can convert all popular video files to 3GP video format such as AVI to 3GP, MPEG to 3GP, VOB to 3GP.

Step 3: Download

As soon as you click ¡°OK¡± to start downloading, the  following interface will show up and present you with download info including download  process and status. Once download completed, you should click on the file  firstly, and then press ¡°Open¡± button to get the output FLV file. By the way,  this program offers a built-in FLV player, you can click on the file at first,  and then click ¡°Play¡± button to play it as you like.

Tips:

1. This program supports batch tasks so that you can  download multiple YouTube video files in batches at a  time.

2. It also provides users with conversion function, with  which you can convert any YouTube FLV/F4V files to  other formats like MP4, MKA, WAV, AC3, MKV, FLV, MP3, M4A, 3GP, AVI, MOV, MPG,  etc. at will.

H.264 is also known as MPEG-4 AVC. It was developed for use in high definition systems such as HDTV, Blu-ray and HD DVD as well as low resolution portable devices such as PSP and iPod, H.264 offers better quality at lower file sizes than both MPEG-2 and MPEG-4 ASP (DivX or XviD).Mod Converter for Mac also helps you to edit your Mod file and optimize it.Are you searching for some application that can convert M2TS to H.264? Pavtube MTS/ M2TS Converter is the right solution for this as it converts the files from M2TS file format to customized H.264 MP4, MOV, AVI formats for iPod, iPhone, Apple TV, PSP etc. In the following guide I will show you how to convert M2TS to H.264 with the converter.

An easy guide to convert M2TS to H.264
Firstly, please make sure the M2TS Converter has been downloaded and installed. You may download its free trail version from here. It is a clean program for you to make full use of. 

Step 1: Import M2TS files
Launch Pavtue MTS/ M2TS Converter and the window below will pops up. Click the Add button on the upper left and navigate to your M2TS files location, select those you want to convert. Now you can find the selected M2TS videos in file list. You can select any of them and click play button to preview. 

Step 2: Set output format and output folder
After you added M2TS files, you can select an output format for each video file and specify a directory on your computer to save the output files. Click the Format bar and follow Common Video to find H.264 MP4 in the expanded list. If you would like to maintain highest video quality, you may follow HD Video and choose HD MP4, MOV or AVI format encoded with H.264.MKV Converter can convert MKV files to AVI, MKV video to MP4, MKV to 3GP/3G2 and can convert MKV files to video for your iPod, iPhone, PSP etc. When set output folder, you can either type in save path in Output box or click the icon folder and browse to the destination folder. To set advanced audio and video parameter, please click Settings. Here you can set video size, frame rate, aspect ratio, audio channel etc.

Step 3: Start converting M2TS to H.264
Click Convert button and the selected M2TS files will be converted at once. If you would like to join several files together, just select these files and check the Merge into one box before click Convert. You may check the converting progress and set auto shutdown in the convert window.

Tip: Footages shot by some camcorders may ends up interlaced. Juggled edges and ghosting occurs when you preview the M2TS files. In that case you can set deinterlace effect to eliminate the combing. Follow Edit->Effect->Deinterlacing.

Because of the victory over HD DVD in the format war,  Blu-ray disc has established its own reputation in this field. The one who does  not have Blu-ray movie collections may be considered out of date. As a matter  of fact, BD has become the symbol of high quality movies-high resolution,  crystal image, and theater-like surround sound.

However, it¡¯s uneasy to keep a large number of Blu-ray  discs in a tidy way, especially when you have hundreds of discs. Due to this, backup  them to your home server, or the hard disk of your Mac, or some external hard  drives would be a good way to digitalize and store your BD collections. To backup  Blu-ray movies, you need a Blu-ray Ripper, the thing is that most programs are  unable to deal with BD subtitles and audio tracks in a correct way, or have  audio and video out of sync issues, etc. Fortunately, Pavtube Blu-Ray Ripper  for Mac is out of this category, it is professional in converting Blu-ray  subtitles and audio tracks. My great pleasure to share its step-by-step process  here, hope it will be of some help for you folks who are looking for such an  application.

Okay, here we go.

First of all, you can download Pavtube Blu-Ray Ripper for  Mac here.

Step 1: Launch this  program, and load Blu-ray files to it.

You can import BD files through "DVD Folder" and "IFO File".  Generally speaking, the .m2ts stream which has the longest duration would be  the main movie, you can right-click on it, and then "Uncheck all", afterwards,  only tick off it to convert would be OK.



Step 2: Select subtitle

Click the drop-down list of "Format", then all the  subtitle info in the Blu-ray will be shown clearly, including language and  stream ID, so you can select your needed language as your subtitle.


How to get video to psp more than play games.

Step 3: Select audio  track

Click the pull down menu of "Audio", and then the list  will give you the detailed information of audio tracks, including language, audio  codec, stream ID and audio channel. TrueHD audio and DTS-Master Audio are all  supported.



Step 4: Click the  drop-down list of "Format" to select output format

This program provides a wide range of output formats,  including SD format, HD format, and videos for various multimedia devices, like  iPod, iPhone, Apple TV, PSP, PS3, Archos, Motorola Droid, etc., you can select  whatever format you need at will.

Step 5: Click "Settings"  button to adjust audio and video parameters

All the parameters in the following window are changeable,  including codec name, bit rate, aspect ratio, frame rate, sample rate, and  channels. You can adjust these items to make good control of your output file  quality and file size.



Step 6: Click "Convert"  button to start BD ripping

Once finished, you can click "Open" button to find out the  output files with your selected subtitle and audio stream with ease.